EasyManuals Logo

Huawei Quidway S8500 Series User Manual

Huawei Quidway S8500 Series
1341 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #890 background imageLoading...
Page #890 background image
Command Manual – Security
Quidway S8500 Series Routing Switches
Chapter 2 AAA and RADIUS/HWTACACS Protocol
Configuration Commands
Huawei Technologies Proprietary
2-4
View
System view
Parameter
all : Configures to disconnect all connection.
access-type dot1x: Configures to disconnect the user connections that are of
specified access category.
dot1x: Specifies 802.1x users.
gcm: Specifies GCM users.
mac-authentication: Specifies users authenticated by MAC addresses.
domain domain-name: Configures to cut the connection according to ISP domain.
domain-name specifies the ISP domain name with a character string not exceeding 24
characters. The specified ISP domain shall have been created.
mac mac-address: Configures to cut the connection of the supplicant whose MAC
address is mac-address. The argument mac-address is in the hexadecimal format
(x-x-x).
radius-scheme radius-server-name: Configures to cut the connection according to
RADIUS scheme name. radius-server-name specifies the RADIUS server name with a
character string not exceeding 32 characters.
interface interface-type interface-num: Configures to cut the connection according to
the port.
ip ip-address: Configures to cut the connection according to IP address.
vlan vlanid: Configures to cut the connection according to VLAN ID. Here, vlanid
ranges from 1 to 4094.
ucibindex ucib-index: Configures to cut the connection according to ucib-index. Here,
ucib-index ranges from 0 to 2311.
user-name user-name: Configures to cut the connection according to user name .
user-name is the argument specifying the username. It is a character string not
exceeding 32 characters, excluding “/”, “:”, “*”, “?”, “<” and “>”. The @ character can
only be used once in one username. The pure username (the part before @, namely
the user ID) cannot exceed 55 characters.
Description
Use the cut connection command to disconnect a user or a category of users by force.
Related command: display connection.
Example
# Cut all the connections in the ISP domain, huawei163.net.

Table of Contents

Other manuals for Huawei Quidway S8500 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei Quidway S8500 Series and is the answer not in the manual?

Huawei Quidway S8500 Series Specifications

General IconGeneral
BrandHuawei
ModelQuidway S8500 Series
CategorySwitch
LanguageEnglish

Related product manuals