Huawei Quidway S8500 Series User Manual

Command Manual – System Management
Quidway S8500 Series Routing Switches Chapter 5 SNMP Configuration Commands
Huawei Technologies Proprietary
5-4
# Display the information about the currently configured MIB view.
<Quidway> display snmp-agent mib-view
View name:ViewDefault
MIB Subtree:internet
Subtree mask:
Storage-type: nonVolatile
View Type:included
View status:active
View name:ViewDefault
MIB Subtree:snmpUsmMIB
Subtree mask:
Storage-type: nonVolatile
View Type:excluded
View status:active
View name:ViewDefault
MIB Subtree:snmpVacmMIB
Subtree mask:
Storage-type: nonVolatile
View Type:excluded
View status:active
The following table describes the output fields.
Table 5-3 Description on the fields of the display snmp-agent mib-view command
Field Description
View name View name
MIB Subtree MIB subtree
Subtree mask Subtree mask
storage-type Storage type
View Type Permit or forbid access to an MIB object
View status Indicate the line state in the table
Caution:
If the SNMP Agent is disabled, "Snmp Agent disabled" will be displayed after you
execute the above display commands.

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English