Huawei Quidway S8500 Series User Manual

Command Manual – Integrated Management
Quidway S8500 Series Routing Switches Chapter 1
HGMP V1 Configuration Commands
Huawei Technologies Proprietary
1-7
View
Any view
Parameter
all: Specifies to display all registered Ethernet switches.
port slot subslot port: Specifies an Ethernet port of the management device to display
the Ethernet switches registering with the management device through the Ethernet
port. Argument of slot, subslot, and port are slot number, subslot number and port
number respectively.
position lanswitch-loc: Specifies to display the Ethernet switch at a specified position.
The lanswitch-loc argument is the position parameter for the Ethernet switch.
error: Displays the Ethernet switches that operate improperly after registering.
inactive: Specifies to display Ethernet switches that are inactive after registering.
Description
Use the display lanswitch command to display the information about specified
registered Ethernet switches. The information includes those about the Ethernet
switches connected to the port. If the Ethernet switches are connected to the port and
registered successfully, information about the management MAC address, device ID,
state and so on is displayed.
Example
# Display the information about all registered Ethernet switches.
<Quidway> display lanswitch all
Lanswitch list.........
------------------
No. 1
------------------
Position : LANSWITCH[3/1/6-/]
PortMode : TREE-MODE
Lanswitch Name :
Model : Quidway S2403F
Device ID : V43.f.2
MacAddr : 00-e0-fc-01-01-01
Status : NORMAL
Table 1-2 Description on the fields of the display lanswitch command
Field Description
Position The position of the switch connected to management device
PortMode The mode of the ports the switch connected to

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English