Command Manual – System Management
Quidway S8500 Series Routing Switches
Chapter 8 SSH Terminal Service Configuration
Commands
Huawei Technologies Proprietary
8-30
Parameter
ipaddr: IP address of the server.
prefer_key: Preferred key exchange algorithm, which can be either
diffie-hellman-group1-sha1 or diffie-hellman-group-exchange-sha1.
dh_group1: Key exchange algorithm diffie-hellman-group1-sha1, which is default
algorithm.
dh_exchange_group: Key exchange algorithm diffie-hellman-group-exchange-sha1.
prefer_ctos_cipher: Preferred encryption algorithm from the client to the server. The
default algorithm is aes128.
prefer_stoc_cipher: Preferred encryption algorithm from the server to the client. The
default algorithm is aes128.
des: Encryption algorithm des_cbc.
3des: Encryption algorithm 3des_cbc.
aes128: Encryption algorithm aes_128.
prefer_ctos_hmac: Preferred HMAC algorithm from the client to the server. The
default algorithm is sha1_96.
prefer_stoc_hmac: Preferred HMAC algorithm from the server to the client. The
default algorithm is sha1_96.
sha1: HMAC algorithm hmac-sha1.
sha1_96: HMAC algorithm hmac-sha1-96.
md5: HMAC algorithm hmac-md5.
md5_96: HMAC algorithm hmac-md5-96.
Description
Use the sftp command to establish the connection with the remote SFTP server and
enter the SFTP Client view.
Example
# Connect to the SFTP server with IP address 10.214.49.126 using the default
encryption algorithm.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] sftp 10.214.49.126
To Next Page
Loading...
