Command Manual – Appendix
Quidway S8500 Series Routing Switches Appendix A Command Index
Huawei Technologies Proprietary
A-18
hgmpserver NAT&URPF&VPLS 1-8
history-command max-size Getting Started 1-13
host-route Routing Protocol 2-5
hwtacacs nas-ip Security 2-53
hwtacacs scheme Security 2-54
I
idle-cut Security 2-10
idle-timeout Getting Started 1-14
ids-acl Port 5-1
if-match { acl | ip-prefix } Routing Protocol 6-11
if-match as-path Routing Protocol 6-12
if-match community Routing Protocol 6-13
if-match cost Routing Protocol 6-14
if-match interface Routing Protocol 6-14
if-match ip next-hop Routing Protocol 6-15
if-match mpls-label MPLS 2-15
if-match tag Routing Protocol 6-16
if-match vpn-target MPLS 2-16
igmp enable Multicast Protocol 4-4
igmp fast-leave Multicast Protocol 4-5
igmp group-limit Multicast Protocol 4-7
igmp group-policy Multicast Protocol 4-8
igmp host-join port Multicast Protocol 4-9
igmp host-join vlan Multicast Protocol 4-9
igmp lastmember-queryinterval Multicast Protocol 4-10
igmp max-response-time Multicast Protocol 4-11
igmp proxy Multicast Protocol 4-15
igmp robust-count Multicast Protocol 4-12
igmp timer other-querier-present Multicast Protocol 4-12
igmp timer query Multicast Protocol 4-13
igmp version Multicast Protocol 4-14
igmp-snooping Multicast Protocol 1-4
igmp-snooping fast-leave Multicast Protocol 1-6
To Next Page
Loading...
