Huawei Quidway S8500 Series - Page 1330

Command Manual – Appendix
Quidway S8500 Series Routing Switches Appendix A Command Index
Huawei Technologies Proprietary
A-30
qos conform-level QACL 2-28
qos cos-drop-precedence-map QACL 2-28
qos cos-local-precedence-map QACL 2-30
query active-configuration NAT&URPF&VPLS 1-33
query address NAT&URPF&VPLS 1-34
query gatewayip NAT&URPF&VPLS 1-35
query hgmpport-mode NAT&URPF&VPLS 1-10
query ip address NAT&URPF&VPLS 1-22
query link-aggregation NAT&URPF&VPLS 1-35
query manageip NAT&URPF&VPLS 1-37
query mirror NAT&URPF&VPLS 1-37
query multiaddr NAT&URPF&VPLS 1-38
query port NAT&URPF&VPLS 1-12
query port lockstate NAT&URPF&VPLS 1-39
query rmon NAT&URPF&VPLS 1-40
query saved-configuration NAT&URPF&VPLS 1-42
query system NAT&URPF&VPLS 1-43
query uniaddr port NAT&URPF&VPLS 1-43
query used addrnum NAT&URPF&VPLS 1-44
query vdsllink NAT&URPF&VPLS 1-45
query vlan NAT&URPF&VPLS 1-13
query vlanstate NAT&URPF&VPLS 1-46
queue QACL 2-32
queue-scheduler QACL 2-34
quick-ping enable System Management 4-3
quit Getting Started 1-19
quit System Management 1-38
quit System Management 8-16
quit System Management 8-27
R
radius nas-ip Security 2-35
radius scheme Security 2-36
reboot System Management 3-8