Command Manual – VLAN&QinQ
Quidway S8500 Series Routing Switches Chapter 1
VLAN Configuration Commands
Huawei Technologies Proprietary
1-13
Description
Use the protocol-vlan command to specify the parameters of VLANs based on
AppleTalk, IP, IPX, etc.
Use the undo vlan-type protocol command to cancel this configuration.
Related command: display protocol-vlan vlan.
Example
# Specify VLAN 5 to be based on the network segment 123.34.56.0.
[Quidway-vlan5] vlan-type protocol ip 123.34.56.0
# Configure AppleTalk-based protocol VLAN 5
[Quidway-vlan5] protocol-vlan at
To Next Page
Loading...
