Huawei Quidway S8500 Series - Page 17

Command Manual – Getting Started
Quidway S8500 Series Routing Switches Chapter 1
Commands Used to Log in to Switch
Huawei Technologies Proprietary
1-6
You can either specify the number of commands to be queried (Command-Number) or
input a string to query commands that match the string. You can the two methods
separately or in combination.
z If you only specify Command-Number, the first Command-Number pieces of
commands will be displayed.
z If you specify a regular expression “| { begin | include | exclude } Match-string”,
all the commands that have been successfully executed by the user and that
match the regular expression.
z If you specify both the number of commands Command-Number and a regular
expression “| { begin | include | exclude } Match-string”, the system will display
the commands that match the regular expression among the first
Command-Number pieces of commands.
Related command: history-command max-size.
Example
# Display all history commands in the buffer.
<Quidway>display history-command
system-view
user-interface vty 0
user-interface vty 0 4
history-command max-size 100
quit
display vlan
display vlan all
acl name lc
interface Vlan-interface 1
ip address 10.11.113.14 24
quit
quit
# Display the first 5 commands in the history command buffer.
<Quidway>display history-command 5
system-view
user-interface vty 0
user-interface vty 0 4
history-command max-size 100
quit
# Display all the buffered history commands that match the specified regular
expression.
<Quidway>display history-command | begin ip
ip address 10.11.113.14 24
quit