Huawei Quidway S8500 Series User Manual

Command Manual – Getting Started
Quidway S8500 Series Routing Switches Chapter 1
Commands Used to Log in to Switch
Huawei Technologies Proprietary
1-8
Example
# Display the relational information of user interface 0.
<Quidway> display user-interface 0
Idx Type Tx/Rx Modem Privi Auth Int
+ 0 CON 0 9600 - 3 N -
+ : Current user-interface is active.
F : Current user-interface is active and work in async mode.
Idx : Absolute index of user-interface.
Type : Type and relative index of user-interface.
Privi: The privilege of user-interface.
Auth : The authentication mode of user-interface.
Int : The physical location of UIs.
A: Authenticate use AAA.
N: Current UI need not authentication.
P: Authenticate use current UI's password.
Table 1-1 Description on the fields of the display user-interface command
Field Description
+ Current user interface is in use
F Current user interface is in use and work in asynchronous mode
Idx Absolute index of user interface
Type Type and relative index of user interface
Tx/Rx User interface speed
Modem Modem operation mode
Privi
Which levels of commands can be used after logging in from the user
interface
Auth User interface authentication method
Int The physical location of user interfaces
# Display the summary information of user interface 0.
<Quidway> display user-interface 0 summary
0: U
1 character mode users. (U)
1 total UIs in use.
UI's name: con0

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English