Command Manual – Network Protocol
Quidway S8500 Series Routing Switches Chapter 7 IP Performance Configuration Commands
Huawei Technologies Proprietary
7-11
Initiated connections: 0, accepted connections: 0, established connections:
0
Closed connections: 0 (dropped: 0, initiated dropped: 0)
Packets dropped with MD5 authentication: 0
Packets permitted with MD5 authentication: 0
Table 7-5 Description on the fields of the display tcp statistics command
Field Description
Received packets
Information followed is about received
packets
Total:753 Total number of received packets: 753
packets in sequence: 412 (11032 bytes)
Up to 412 packets (total of 11,032 bytes)
arrive in sequence
window probe packets: 0, window
update packets: 0
Number of window probe packets: 0
Number of window update packets: 0
checksum error: 0, offset error: 0, short
error: 0
Number of checksum errors: 0
Number of offset errors: 0
Number of short errors: 0
duplicate packets: 4 (88 bytes), partially
duplicate packets: 5 (7 bytes)
Number of duplicate packets: 4 (total of
88 bytes)
Number of partially duplicate packets: 5
(total of 7 bytes)
out-of-order packets: 0 (0 bytes)
Number of out-of-order packets: 0 (0
byte)
packets of data after window: 0 (0 bytes)
Number of packets out of receiving
window: 0 (0 byte)
packets received after close: 0
Number of packets received after the
connection closed: 0
ACK packets: 481 (8776 bytes)
Number of ACK packets: 481 (total of
8776 bytes of data acknowledged)
duplicate ACK packets: 7, too much
ACK packets: 0
Number of duplicate ACK packets: 7
Number of too-much ACK packets: 0
(ACK packets that acknowledge data
not sent)
Sent packets
Information followed is about sent
packets
Total: 665 Total number of sent packets: 665
urgent packets: 0 Number of urgent packets: 0
control packets: 5 (including 1 RST)
Number of control packets: 5 (including
1 RST packet)
To Next Page
Loading...
