Huawei Quidway S8500 Series User Manual

Command Manual – Routing Protocol
Quidway S8500 Series Routing Switches Chapter 1 Static Route Configuration Commands
Huawei Technologies Proprietary
1-7
This command displays all destination address route matching with destination
address in natural mask range.
Example
# There is a corresponding route in natural mask range. Display the summary.
<Quidway> display ip routing-table 169.0.0.0
Destination/Mask Protocol Pre Cost Nexthop Interface
169.0.0.0/16 STATIC 60 0 192.168.1.2 Vlan-interface10
169.0.0.0/8 STATIC 60 0 192.168.1.2 Vlan-interface10
For detailed description of the output information, see Table 1-1.
# There is no corresponding route (only the longest matching route is displayed) in
natural mask range and summary is displayed.
<Quidway> display ip routing-table 192.168.1.2
Destination/Mask Protocol Pre Cost Nexthop Interface
192.168.1.0/24 DIRECT 0 0 192.168.1.1 Vlan-interface10
# There are corresponding routes in the natural mask range. Display the detailed
information.
<Quidway> display ip routing-table 169.0.0.0 verbose
Routing tables:
Generate Default: no
+ = Active Route, - = Last Active, # = Both * = Next hop in use
Summary count: 3
**Destination: 169.0.0.0 Mask: 255.255.0.0
Protocol: #STATIC Preference: 60
*NextHop: 192.168.1.2 Interface: 192.168.1.1(Vlan-interface10)
Vlinkindex: 0
State: <Int ActiveU Gateway Static Unicast>
Age: 10:20 Cost: 0/0 Tag: 0
**Destination: 169.0.0.0 Mask: 255.0.0.0
Protocol: #STATIC Preference: 60
*NextHop: 192.168.1.2 Interface: 192.168.1.1(Vlan-interface10)
Vlinkindex: 0
State: <Int ActiveU Gateway Static Unicast>
Age: 4:39 Cost: 0/0 Tag: 0
# There are no corresponding routes in the natural mask range (only displaying the
longest matched route). Display the detailed information.
<Quidway> display ip routing-table 169.168.1.2 verbose

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English