Huawei Quidway S8500 Series - Page 305

Command Manual – Routing Protocol
Quidway S8500 Series Routing Switches Chapter 2 RIP Configuration Commands
Huawei Technologies Proprietary
2-3
Description
Use the display rip command to view the current RIP running state and its
configuration information.
Example
# Display the current running state and configuration information of the RIP.
<Quidway> display rip
RIP is running
public net VPN-Instance
Checkzero is on Default cost : 1
Summary is on Preference : 100
Traffic-share is off
Period update timer : 30
Timeout timer : 180
Garbage-collection timer : 120
No peer router
Network :
202.38.168.0
Table 2-1 Description of the fields of the display rip command
Field Description
RIP is running RIP is active
public net VPN-Instance Public network in the VPN
Checkzero is on Enable zero field checking
Default cost : 1 The default route cost is 1
Summary is on Routes are summarized automatically
Preference : 100 The preference of RIP is 100
Traffic-share is off Load balancing state for the interface
Period update timer : 30
Timeout timer : 180
Garbage-collection timer : 120
Three timers of RIP
No peer router
No destination address of a
transmission is specified
Network :202.38.168.0
Enable RIP on network segment
202.38.168.0