Command Manual – Routing Protocol
Quidway S8500 Series Routing Switches Chapter 3 OSPF Configuration Commands
Huawei Technologies Proprietary
3-14
Parameter
process-id: Process ID of OSPF. The command is applied to all current OSPF
processes if you do not specify a process ID.
Description
Use the display ospf brief command to view the main summary of OSPF.
Example
# Display the OSPF summary.
<Quidway> display ospf brief
OSPF Process 1 with Router ID 10.110.95.189
OSPF Protocol Information
RouterID: 10.110.95.189 Border Router: Area AS
spf-schedule-interval: 5
Routing preference: Inter/Intra: 10 External: 150
Default ASE parameters: Metric: 1 Tag: 0.0.0.1 Type: 2
SPF computation count: 16
Area Count: 1 Nssa Area Count: 0
Area 0.0.0.0:
Authtype: none Flags: <>
SPF scheduled: <>
Interface: 201.1.1.4 (Vlan-interface1)
Cost: 1 State: DR Type: Broadcast
Priority: 1
Designated Router: 201.1.1.4
Backup Designated Router: 201.1.1.3
Timers: Hello 10, Dead 40, Poll 0, Retransmit 5, Transmit Delay 1
Table 3-3 Description of the fields of the display ospf brief command
Field Description
RouterID Router ID of the router
Border Router
Border routers for connection to the area, including
autonomous system border router (ASBR) and area
border router (ABR)
spf-schedule-interval Interval of SPF schedule in seconds
Authtype Authentication type of OSPF
Routing preference
Routing preference of OSPF. The internal route of OSPF
includes intra/inter area route, and its default routing
preference is 10. While that of the external route of OSPF
is 150 by default
To Next Page
Loading...
