Huawei Quidway S8500 Series - Page 375

Command Manual – Routing Protocol
Quidway S8500 Series Routing Switches Chapter 3 OSPF Configuration Commands
Huawei Technologies Proprietary
3-55
Related command: authentication-mode, display ospf.
Example
# Create a virtual link to 10.110.0.3 and use the MD5 cipher authentication mode.
[Quidway-ospf-1] area 10.0.0.0
[Quidway-ospf-1-area-10.0.0.0] vlink-peer 10.110.0.3 md5 3 345
# Specify this virtual link to run Fast Hello function and send five Hello packets.
[Quidway-ospf-1-area-10.0.0.0] vlink-peer 10.110.0.3 dead minimal
multi-hello 5