Command Manual – Multicast Protocol
Quidway S8500 Series Routing Switches Chapter 1 IGMP Snooping Configuration Commands
Huawei Technologies Proprietary
1-8
[Quidway-Ethernet2/1/1] igmp-snooping fast-leave vlan 5 7 to 8 30 to 40 50 55
60 to 61
# Enable IGMP Snooping fast leave on the Ethernet2/1/1 port in all VLANs.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway]interface Ethernet2/1/1
[Quidway-Ethernet2/1/1] igmp-snooping fast-leave
# Enable IGMP Snooping fast leave on the Ethernet2/1/1 port in all VLANs. Then
disable the feature in VLAN 3.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface Ethernet2/1/1
[Quidway-Ethernet2/1/1] igmp-snooping fast-leave
[Quidway-Ethernet2/1/1] undo igmp-snooping fast-leave vlan 3
# Disable IGMP Snooping fast leave on the Ethernet2/1/1 port in all VLANs.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface Ethernet2/1/1
[Quidway-Ethernet2/1/1] undo igmp-snooping fast-leave
# Enable IGMP Snooping fast leave on all Ethernet ports in VLAN 5.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] igmp-snooping fast-leave vlan 5
# Enable IGMP Snooping fast leave on all Ethernet ports in all VLANs.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] igmp-snooping fast-leave
# Enable IGMP Snooping fast leave for all Ethernet ports except those in VLAN 5.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] igmp-snooping fast-leave
[Quidway] undo igmp-snooping fast-leave vlan 5
# Disable IGMP Snooping fast leave in all VLANs.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] undo igmp-snooping fast-leave
To Next Page
Loading...
