Huawei Quidway S8500 Series User Manual

Command Manual – Multicast Protocol
Quidway S8500 Series Routing Switches
Chapter 7 MBGP Multicast Extension
Configuration Commands
Huawei Technologies Proprietary
7-29
multiple route reflectors can improve network stability, then you can use this command
to specify the same cluster ID for them all.
Related command: reflect between-clients and peer reflect-client.
Example
# Specify cluster ID for local router, one of the router reflectors.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] bgp 100
[Quidway-bgp] ipv4-family multicast
[Quidway-bgp-af-mul] reflector cluster-id 80
[Quidway-bgp-af-mul] peer test reflect-client
7.1.41 summary
Syntax
summary
undo summary
View
IPv4 multicast sub-address family view
Parameter
None
Description
Use the summary command to set to auto-aggregate subnet routes.
Use the undo summary command to remove the configuration.
By default, subnet routes can not be aggregated automatically.
After the summary command is executed, MBGP cannot receive the subnet routes
imported by IGP. You can use this command to reduce route selection information.
Example
# Enable subnet route auto-aggregation.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] bgp 100
[Quidway-bgp] ipv4-family multicast
[Quidway-bgp-af-mul] summary

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English