Huawei Quidway S8500 Series - Page 660

Command Manual – QoS/ACL
Quidway S8500 Series Routing Switches Chapter 2 QoS Commands
Huawei Technologies Proprietary
2-17
Description
Use the dscp command to configure the “DSCP + Conform-level — >
Service-parameter” mapping table of current conform level.
Use the undo dscp command to restore default configuration of the “DSCP +
Conform-level —> Service- parameter” mapping table.
After entering conform level view, you can configure the “DSCP + Conform-level —>
Service-parameter” mapping table of the corresponding level. For example, you can
enter conform level 0 view and configure the “DSCP + Conform-level 0 — >
Service-parameter” mapping table.
Example
# Configure the " DSCP + Conform-level 0 —> Service-parameter ” mapping table.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway]qos conform-level 0
[Quidway-conform-level-0] dscp 0: 0 0 0 0 0
[Quidway-conform-level-0] dscp 8 10 : 8 0 1 1 0
[Quidway-conform-level-0] dscp 16 18: 16 0 2 2 0
[Quidway-conform-level-0] dscp 24 26 : 24 0 3 3 0
[Quidway-conform-level-0] dscp 32 34 : 32 0 4 4 0
[Quidway-conform-level-0] dscp 40 46: 40 0 5 5 0
[Quidway-conform-level-0] dscp 48 : 48 0 6 6 0
[Quidway-conform-level-0] dscp 56 : 56 0 7 7 0
The configured mapping table:
Table 2-1 “ DSCP + Conform-level —> Service-parameter ” mapping table
DSCP CL
Policed-DSC
P
Policed-e
xp
Police
d-802.1
p
Policed-
Localpr
ec
Policed-Dr
opPrecede
nce
0 0 0 0 0 0 0
8 0 8 0 1 1 0
10 0 8 0 1 1 0
16 0 16 0 2 2 0
18 0 16 0 2 2 0
24 0 24 0 3 3 0
26 0 24 0 3 3 0
32 0 32 0 4 4 0
34 0 32 0 4 4 0