Command Manual – QoS/ACL
Quidway S8500 Series Routing Switches Chapter 2 QoS Commands
Huawei Technologies Proprietary
2-21
II. Command Format Which Applies IP Group and Link Group ACL at Same
time
mirrored-to inbound ip-group { acl-number | acl-name } { rule rule link-group
{ acl-number | acl-name } [ rule rule [ system-index index ] ] | link-group { acl-number
| acl-name } rule rule } cpu
undo mirrored-to inbound ip-group { acl-number | acl-name } { rule rule link-group
{ acl-number | acl-name } [ rule rule ] | link-group { acl-number | acl-name } rule rule }
III. Command Format Which Only Applies Link Group ACL
mirrored-to inbound link-group { acl-number | acl-name } [ rule rule [ system-index
index ] ] cpu
undo mirrored-to inbound link-group { acl-number | acl-name } [ rule rule ]
View
Ethernet port view
Parameter
inbound: Mirrors inbound packets at the port.
ip-group { acl-number | acl-name }: Activates IP ACLs, including basic and advanced
ACLs. acl-number: Sequence number of ACL, ranging from 2000 to 3999. acl-name:
Name of the ACL, which must be a character string starting with an English letter (a-z or
A-Z), and without any space or quotation mark in it.
link-group { acl-number | acl-name }: Activates Layer 2 ACLs. acl-number: Sequence
number of ACL, ranging from 4000 to 4999. acl-name: Name of ACL, which must be a
character string started with an English letter (a-z or A-Z), and without any space or
quotation mark in it.
rule rule: Specifies the rule of an active ACL, ranging from 0 to 127; if not specified, all
rules of ACL will be activated.
system-index index here is the system index for an ACL rule. When delivering a rule,
the system assigns a globally unique index to it, for convenience of later retrieval. You
can also assign a system index for it when delivering an ACL rule with this command.
However, you are not recommended to manually assign a system index if not urgently
necessary.
To Next Page
Loading...
Need help?
General