Huawei Quidway S8500 Series - Page 728

Command Manual – MPLS
Quidway S8500 Series Routing Switches Chapter 1 MPLS Basic Configuration Commands
Huawei Technologies Proprietary
1-18
Maximum Peer PDU length: 4096
Peer KeepAlive hold time: 60
Peer Distribution Method: Downstream Unsolicited
Peer Type: Local
Peer RowStatus: Active
1.2.7 display mpls ldp remote
Syntax
display mpls ldp remote [ | begin text | exclude text | include text ]
View
Any view
Parameter
|: Displays matched outputs.
begin: Displays the outputs matching the regular expression from the first line.
exclude: Displays the outputs excluding those lines matching the regular expression.
include: Displays only those outputs matching the regular expression.
text: Contents of the regular expression.
Description
Use the display mpls ldp remote command to view the configured Remote-peer
information.
By default, you can view all the Remote-peer configurations.
Related command: mpls ldp remote-peer and remote-ip.
Example
# Display the Remote-peer configuration.
<Quidway> display mpls ldp remote
Displaying information about all Ldp Remote Peers:
Remote Index: 1
Peer Address: 1.1.1.1 Transport Address: 2.2.2.2
Configured KeepAlive hold time:60, Configured Hello hold time:45
Negotiated Hello hold time:45
Hello packets sent/rcv:6515/6509
Remote Index: 3
Peer Address: 3.3.3.3 Transport Address: 2.2.2.2
Configured KeepAlive hold time:60, Configured Hello hold time:45