Command Manual – MPLS
Quidway S8500 Series Routing Switches Chapter 3 MPLS L2VPN Configuration Commands
Huawei Technologies Proprietary
3-17
Use the undo peer enable command to deactivate a specified peer or peer group in
L2VPN address family view.
By default, the unicast peers or peer groups of IPv4 address family are active. Whereas
other types of peers or peer groups are inactive.
Example
# Activate peer 192 or peer group 192 in L2VPN address family view.
[Quidway-bgp] group 192 internal
[Quidway-bgp] peer 192.1.1.1 group 192
[Quidway-bgp] l2vpn-family
[Quidway-bgp-af-l2vpn] peer 192 enable
To Next Page
Loading...
