Huawei Quidway S8500 Series - Page 996

Command Manual – System Management
Quidway S8500 Series Routing Switches Chapter 1 File System Management Commands
Huawei Technologies Proprietary
1-17
Description
Use the display saved-configuration command to view the configuration files in the
flash memory or CF card of Ethernet Switch.
If the Ethernet Switch works abnormally after electrified, execute the display
saved-configuration command to view the startup configuration of the Ethernet
Switch.
Related command: save, reset saved-configuration and display
current-configuration.
Example
# Display configuration files in flash memory or CF card of Ethernet Switch.
<Quidway> display saved-configuration
#
sysname Quidway
#
local-user abc password simple abc
#
tcp window 8
#
interface Aux7/1/1
link-protocol ppp
#
interface Ethernet2/1/1
#
interface Ethernet2/1/2
#
interface Ethernet2/1/3
ip address 10.110.101.17 255.255.255.0
#
interface NULL0
#
ospf 1
#
ip route-static 10.12.0.0 255.255.0.0 Ethernet 12/1/0
#
user-interface con 0
user-interface aux 0
user-interface vty 0 4
authentication-mode none
#
return