Huawei Quidway S8500 Series - Page 1078

Command Manual – System Management
Quidway S8500 Series Routing Switches Chapter 4 System Maintenance Commands
Huawei Technologies Proprietary
4-36
Parameter
level: level.
levelnum: Information level value, ranging from 1 to 8.
emergencies, alerts, critical, debugging, errors, informational, notifications,
warnings are the names of the eight log severity levels. You can type the values or
names of the desired severity levels, which are equivalent, in commands.
Table 4-5
gives the details.
Table 4-5 Severity levels defined in the information center
Severity Value Description
emergencies 1 Emergent errors
alerts 2 Errors you must correct immediately
critical 3 Critical errors
errors 4 Errors requiring your attention but not critical
warnings 5 Warning, an error may occur
notifications 6 Information requiring your attention
informational 7 General prompt information
debugging 8 Debugging information
size: Configures the size of buffer.
sizenum: Size of buffer (number of messages which can be kept); ranging from 1 to
1024. By default, the size of the buffer is 256.
|: Filters the configuration information to be output by regular expression.
begin: Begins with the line that matches the regular expression.
exclude: Excludes lines that match the regular expression.
include: Includes lines that match the regular expression.
text: Defines the regular expression.