Huawei Quidway S8500 Series - Page 1251

Command Manual – Integrated Management
Quidway S8500 Series Routing Switches Chapter 1
HGMP V1 Configuration Commands
Huawei Technologies Proprietary
1-11
View
HGMP view
Parameter
None
Description
Use the query hgmpport-mode command to display topology information about the
networks connected to ports of the management device.
To enable the management device to automatically collect information about the
Ethernet switches attached to it, you need configure the networks connected to the
ports of the management device to adopt star topology by using the spanning-hub
command on the management device.
Example
# Display topology information about the networks connected to the ports of the
management device.
[Quidway-hgmp] query hgmpport-mode
===============================================================
port mode('X': spanning-hub mode)
port mode('-': tree mode)
===============================================================
SlotNo: 0
SlotNo: 1
SlotNo: 2
SlotNo: 3
SubSlotNo: 1
-------------------------------------------------------------
|0|0|0|0|0|0|0|0|0|1|1|1|1|1|1|1|1|1|1|2|
|1|2|3|4|5|6|7|8|9|0|1|2|3|4|5|6|7|8|9|0|
-------------------------------------------------------------
0 |-|-|-|-|-|-|-|-|-|-|-|-|-|-|-|-|-|-|-|-|
20 |-|-|-|-|-|-|-|-|-|-|-|-|
--------------------------------------------------------------
SubSlotNo: 2
-------------------------------------------------------------
|0|0|0|0|0|0|0|0|0|1|1|1|1|1|1|1|1|1|1|2|
|1|2|3|4|5|6|7|8|9|0|1|2|3|4|5|6|7|8|9|0|
-------------------------------------------------------------
0 |-|-|-|-|
--------------------------------------------------------------