Huawei Quidway S8500 Series User Manual

Command Manual – Routing Protocol
Quidway S8500 Series Routing Switches Chapter 5 BGP Configuration Commands
Huawei Technologies Proprietary
5-14
Description
Use the display bgp peer command to view the information about BGP peers.
Example
# Display the detail information of the peer 201.1.1.2.
<Quidway> display bgp peer 201.1.1.2 verbose
Peer: 201.1.1.2+179 Local: 200.1.1.1+1195
Type: External
State: Established Flags: <>
Expiring Time: 00:02:19
Last State: OpenConfirm Last Event: RecvKeepAlive
Last Error: None
Options: <KeepAll Ttl>
Peer Version: 4 Peer ID: 201.1.1.2 Local ID: 200.1.1.1
Active Holdtime: 180s, Keepalive: 60s
Last traffic (seconds): Received 41 Sent 41 Checked 41
Input messages: Total 4 Updates 1 Octets 125
Output messages: Total 4 Updates 1 Octets 148
Route Queue Timer: unset
Peer capabilities:
Route refresh: advertised and received
Ipv4-family Unicast: advertised and received
Configuration within the peer :
no export policy route-policy
no export policy ip-prefix
no export policy filter-policy
no export policy acl
no import policy route-policy
no import policy ip-prefix
no import policy filter-policy
no import policy acl
no default route produce
Table 5-5 Description of the fields of the display bgp peer verbose command
Field Description
Peer
IP address of peer and port number used by the peer to establish
TCP connection
Local
IP address and port number used to establish TCP connection of
local end
Type Type of peer: Internal for IBGP, and External for EBGP

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English