Huawei Quidway S8500 Series - Page 428

Command Manual – Routing Protocol
Quidway S8500 Series Routing Switches Chapter 5 BGP Configuration Commands
Huawei Technologies Proprietary
5-15
Field Description
State State of peer
Flags Flags of peer
Last State Last state before entering the current state
Last Event Last event of neighbor state machine
Last Error Last error of neighbor state machine
Options Options
5.1.16 display bgp routing-table
Syntax
display bgp routing-table [ ip-address [ mask ] ]
View
Any view
Parameter
ip-address: Destination of the network.
mask: Mask of the network.
Description
Use the display bgp routing-table command to view all the BGP routing information.
Example
# Display all the BGP routing information.
<Quidway> display bgp routing-table
Flags: # - valid ^ - active I - internal
D - damped H - history S - aggregate suppressed
B – balance
Dest/Mask Next-hop Med Local-pref Origin As-path
-----------------------------------------------------------------------
#^ 129.1.1.0/24 5.5.5.5 IGP 600
#^ 129.1.2.0/24 5.5.5.5 IGP 600
#^ 129.1.3.0/24 5.5.5.5 IGP 600
#^ 129.1.4.0/24 5.5.5.5 IGP 600
#^ 129.1.5.0/24 5.5.5.5 IGP 600
#^ 129.1.6.0/24 5.5.5.5 IGP 600
#^ 129.1.7.0/24 5.5.5.5 IGP 600