Huawei Quidway S8500 Series User Manual

Command Manual – Multicast Protocol
Quidway S8500 Series Routing Switches Chapter 3 Multicast Common Configuration Commands
Huawei Technologies Proprietary
3-7
Member port(s):Ethernet2/1/2
MAC group(s):
MAC group address:01-00-5e-2d-2d-01
Member port(s):Ethernet2/1/2
Table 3-2 Description on the fields of the display mpm group command
Field Description
Vlan(id):2. The output information is about VLAN 2.
Router port(s):Ethernet2/1/1 The router port concerned is Ethernet2/1/1.
IP group(s):the following ip group(s)
match to one mac group.
Lists the IP multicast groups matching the
same MAC multicast group.
IP group address:230.45.45.1
The IP address of the IP multicast group is
230.45.45.1.
Member port(s):Ethernet2/1/2
Ethernet2/1/2 port is a member port of the
IP multicast group.
MAC group
address:01-00-5e-2d-2d-01
The MAC address of the MAC multicast
group is 01-00-5e-2d-2d-01.
Member port(s):Ethernet2/1/2
Ethernet2/1/2 port is a member port of the
MAC multicast group.
3.1.7 display multicast forwarding-table
Syntax
display multicast forwarding-table [ group-address [ mask { mask | mask-length } ] |
source-address [ mask { mask | mask-length } ] | incoming-interface{ interface-type
interface-number | null NULL-interface- number | register} ] *
View
Any view
Parameter
group-address: Multicast group address, used to specify a multicast group, ranging
from 224.0.0.0 to 239.255.255.255.
source-address: Unicast IP address of the multicast source.
incoming-interface: Incoming interface of the multicast forwarding table entry.
interface-type interface-number: Interface type and interface number.
null: Incoming-interface is null.
NULL-interface-number: The only number is 0.
register: Register interface of PIM-SM.

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English