Command Manual – Security
Quidway S8500 Series Routing Switches Chapter 1
802.1x Configuration Commands
Huawei Technologies Proprietary
1-3
Configuration: Transmit Period 30 s, Handshake Period 30 s
Quiet Period 60 s, Quiet Period Timer is disabled
Supp Timeout 30 s, Server Timeout 100 s
The maximal retransmitting times 2
Total maximum 802.1x user resource number is 2048
Total current used 802.1x resource number is 0
Ethernet3/1/1 is link-down
802.1X protocol is disabled
Proxy trap checker is disabled
Proxy logoff checker is disabled
The port is a(n) authenticator
Authenticate Mode is auto
Port Control Type is Mac-based
Max on-line user number is 1024
… (Omitted)
Table 1-1 Description of 802.1x configuration information
Field Description
Equipment 802.1X protocol is enabled 802.1X protocol is enabled on the switch.
CHAP authentication is enabled CHAP authentication is enabled
DHCP-launch is disabled
If any user configures a static IP without
authorization in DHCP environment, the
switch will trigger authentication on the
user.
Proxy trap checker is disabled
Proxy logoff checker is disabled
The system does not check the access of
users who log on through a proxy.
Transmit Period Transmit interval timer
Handshake Period
The interval of sending handshake
packets of 802.1x
Quiet Period Quiet period set by Quiet timer
Quiet Period Timer is disable Quiet Period Timer is disable
Supp Timeout
Timeout timer for Supplicant
authentication
Server Timeout Timeout timer for Authentication Server
The maximal retransmitting times
The maximal times for the Ethernet switch
to retransmit authentication request
frames to access user
Total maximum 802.1x user resource
number
The maximum number of access users
allowed
To Next Page
Loading...
