Nokia 9500 MPR - Figure 757 Release EPS Switch

Perform protection switching
1012
WebEML User Manual
Figure 757 Release EPS Switch
To perform a Forced HSB Switch on the Main Radio Channel
1. Select Protection Schemes/Slot#/HSB Protection/Main#1 in the resource
tree area. See Figure 758.
2. On the Commands tab, from the New Value drop-down menu, select Forced.
3. Click Apply.
The Switch confirmation window displays.
4. Click OK.
Caution: Forced HSB switching equipment will cause a hit to traffic.
Release 7.0.0 3DB 19286 ACAA Issue 01