Provision cross connections
362
WebEML User Manual
43.15 Procedures
This section provides the following procedures:
• To open the Cross Connections screen
• To provision a PDH to Radio Cross connection
• To provision a PDH to Ethernet Cross Connection
• To provision an SDH to Radio Cross connection
• To provision an SDH to Ring Cross connection
• To provision an SDH to LAG Cross connection
• To provision an Ethernet to Radio Cross Connection
• To provision Radio to Radio Cross Connection
• To provision a PDH to Ring Cross Connection
• To provision a Radio to Ring Cross Connection
• To provision an Ethernet to Ring Cross Connection
• To provision a Ring to Ring Cross Connection
To open the Cross Connections screen
1. From the Main Menu Bar, select Configuration>Cross Connections.
The Cross Connections window opens. See Figure 198.
Caution: Entering E1/DS1 cross-connections while the spare Core card is Active may affect
existing E1/DS1 cross-connections. To prevent this from occurring, ONLY provision E1/DS1
cross-connections while the main Core is Active.
Release 7.0.0 3DB 19286 ACAA Issue 01
To Next Page
Loading...