WebEML User Manual Administer external alarm points on an Auxiliary
card
111
15 Administer external alarm points on an
Auxiliary card
15.1 Purpose
The procedure s in this chapter provide instructions to administer the external alarm
points supported by the Auxiliary card.
15.2 Prerequisites
The Auxiliary card must be enabled in MSS-4 slot 4 or MSS-8 slot 8 before the
external alarm points can be provisioned.
15.3 General
The Auxiliary card supports six external alarm inputs and seven external alarm
outputs.
Each external alarm input can be provisioned; alarm active low or active high, and
user label.
Each external alarm output can be provisioned; alarm active low or active high, and
user label.
Release 7.0.0 3DB 19286 ACAA Issue 01
To Next Page
Loading...