Nokia 9500 MPR - Figure 598 MPT-HL Settings Tab for Fixed Modulation

Configure radio parameters
792
WebEML User Manual
Figure 598 MPT-HL Settings tab for fixed modulation
7. Provision MPT-HL radio port:
i. In the Mode field, select the Preset radio button.
ii. Click on the Data Help button under the Mode field. The Data Help window
opens.
iii. In the Data Help window, double-click on the table row for the desired
channel spacing (5 MHz, 10 MHz, 30 MHz, or 40 MHz), modulation scheme
(4 QAM, 16 QAM, 32 QAM, 64 QAM, 128 QAM, or 256 QAM), and option
(Std or High Gain).
iv. Click on the Data Help button in the Shifter panel. The Data Help window
opens.
Note: Depending on the modem profile selected, the Tx power may become out of range.
If this occurs, provision the Tx power to the desired level or to one supported by the modem
profile to clear the warning message.
Release 7.0.0 3DB 19286 ACAA Issue 01