WebEML User Manual Open and run performance monitoring
983
To run PM for compression gain statistics
1. From the resource tree area, select the Ethernet Statistics pane.
2. Click on the Bird’s Eye View icon in the toolbar to switch to Bird’s Eye View.
3. From the Ethernet Statistics pane, expand the card tree and select the Ethernet
or L1 LAG port on which to run Ethernet PM.
4. Click Stopped to start the monitoring. Figure 739 shows compression gain
statistics.
Figure 739 Compression gain statistics PM
Release 7.0.0 3DB 19286 ACAA Issue 01
To Next Page
Loading...