WebEML User Manual Provision equipment port
435
Figure 254 Provision CorEvo Sync-In/Out SFP port
4. Click Apply.
The SFP is ready to be configured as Sync-In and Sync-Out ports. See
Administer synchronization.
To provision Sync-In/Out SFP on MSS-1
1. Select Slot #1 MSS/CORE in the resource tree area. The selected name will
highlight in blue. This selection also highlights the MSS-1 in blue in the resource
list area.
2. Click the Settings Tab in the resource detail area. See Figure 255 for an
example.
Release 7.0.0 3DB 19286 ACAA Issue 01
To Next Page
Loading...