Safety awareness
54
WebEML User Manual
Figure 8 EMF emission warning
• On the site when applicable (when people can cross the compliance boundaries
and/or the transmission area of the antenna; for example, roof top installation):
Warning label “Do not stand on the antenna axis”
• On the mast (front side): EMF emission warning sign (yellow and black) to be
placed at bottom of antenna, visible by someone moving in front of the antenna
(roof top installation)
• On the antenna (rear side): EMF emission warning sign, placed on the antenna
Figure 9 Compliance boundaries for 9500 MPR-A transceivers with 1ft (30 cm) antenna
1.4 Electromagnetic compatibility (EMC norms)
The equipment's EMC norms depend on the type of installation being carried out,
such as cable termination or grounding, and on the operating conditions (such as,
equipment, setting options of the electrical/electronic units, presence of dummy
covers).
Before you perform any installation, turn-on, tests & operation, and maintenance
operations, carefully read the related sections of this manual.
The norms set down to guarantee EMC compatibility, are distinguished inside this
manual by the symbol and term:
Release 7.0.0 3DB 19286 ACAA Issue 01
To Next Page
Loading...