Nokia 9500 MPR - Figure 243 Provision Provider Bridge

Provision Ethernet ports
418
WebEML User Manual
d. Click on the Apply button.
To provision provider bridge parameters
1. Provision Provider Bridge parameters using the following procedure. See
Figure 243.
Figure 243 Provision provider bridge
a. Select Ethernet Port#n to provision (Ethernet Port #1/#6).
b. Select Provider Bridge tab.
c. Choose the port type: NNI, UNI (port-based), or UNI (VLAN-based).
d. Configure port type parameters:
• for NNI, choose the S-VLAN TPID from the drop-down menu:
• for UNI (port-based), choose Port Priority or C-VLAN Priority:
• for UNI (VLAN-based), configure C-VLAN/S-VLAN mapping and
egress settings, see Figure 244.
a
c
c
c
d
b
d
d
e
23193
Release 7.0.0 3DB 19286 ACAA Issue 01