Nokia 9500 MPR - Figure 452 Node I to NE E (Protected): Pass-Through Cross-Connection on Node B

Provision cross connections in a mixed fiber/
microwave Ring
642
WebEML User Manual
Figure 452 Node I to NE E (protected): pass-through cross-connection on Node B
a. Choose the flow IDs to cross-connect from the Available VLANs list
b. Choose the Service profile: TDM2TDM or TDM2ETH
c. Choose the Clock Source, if the Service profile is TDM2ETH
d. Enter the Ring East MAC address: Node D Unicast MAC address
e. Enter the Ring West MAC address: NE E Multicast MAC address
• Configure a pass-through cross-connection on Node C, see Figure 401.
Release 7.0.0 3DB 19286 ACAA Issue 01