Nokia 9500 MPR - Dangerous Electrical Voltages; Labeling; Figure 1 Dangerous Voltage; Figure 2 Ground Protection Warning

WebEML User Manual Safety awareness
49
• Harmful optical signals
Pay attention to the information stated in the following, and proceed as instructed.
The symbols presented in following paragraphs are all the possible symbols that
could be present on Nokia equipment, but are not all necessarily present on the
equipment this handbook refers to.
1.3.1 Dangerous electrical voltages
1.3.1.1 Labeling:
The warning label in Figure 1 is affixed next to dangerous voltages (>42.4 Vp; >60
Vdc).
Figure 1 Dangerous voltage
If it is a Class 1 equipment connected to mains, then the label in Figure 2 states that
the equipment must be grounded before you connect it to the power supply voltage;
for example:
Figure 2 Ground protection warning
Release 7.0.0 3DB 19286 ACAA Issue 01