WebEML User Manual Safety awareness
47
1 Safety awareness
1.1 Safety EMC-EMF-ESD norms and equipment
labeling
This section describes the equipment labeling and the norms mandatory or
suggested that must be considered to avoid injuries on persons and/or damage to
the equipment.
• Safety rules
• Electromagnetic compatibility (EMC norms)
• Equipment protection against electrostatic discharges
• Cautions to avoid equipment damage
1.2 Safety rules
1.2.1 General rules
Before you perform any installation, turn-on, tests or operation and maintenance
operations, carefully read the related sections of this manual, specifically:
• Hardware Installation
• Commissioning
• Maintenance and Upgrade
1.2.1.1 Observe safety rules
When equipment is operating, do not access the inside of the equipment parts which
are protected with Cover Plate Shields removable with tools.
If access is required to the equipment parts when it is operating, only service
personnel, where service personnel or technical assistance is meant:
Release 7.0.0 3DB 19286 ACAA Issue 01
To Next Page
Loading...