Nokia 9500 MPR - Figure 601 MPT-HL Settings with ATPC

Configure radio parameters
798
WebEML User Manual
Figure 601 MPT-HL settings with ATPC
21. Provision the MPT-HL radio channel ATPC:
i. Select ATPC Enabled check box.
ii. Enter the Min-Max transmit power value range (dBm).
iii. Enter the Remote ATPC Rx Threshold (-min / -max dBm).
iv. Click Apply.
22. Select an action.
a. To Provision the spare MPT-HL RTPC, go to step 18.
b. To Provision the MPT-HL radio protection scheme, go to step 25.
23. Provision the spare MPT-HL ATPC
Open the appropriate radio main view depending on your radio configuration
and select the Settings tab; see Figure 601 for an example of the ATPC
parameters.
Release 7.0.0 3DB 19286 ACAA Issue 01