Nokia 9500 MPR - Figure 535 NE F (Protected) to Node C (Protected): Pass-Through Cross

Provision cross connections in a mixed fiber/
microwave Ring
720
WebEML User Manual
Figure 535 NE F (protected) to Node C (protected): pass-through cross-connection on Node A
a. Choose the flow IDs to cross-connect from the Available VLANs list
b. Choose the Service profile: TDM2TDM or TDM2ETH
c. Choose the Clock Source, if the Service profile is TDM2ETH
d. Enter the Ring Destination MAC address: NE F Multicast MAC address
e. Enter the Ring Source MAC address: Node C Unicast MAC address
5. Configure a pass-through cross-connection on Node D, see Figure 536.
Release 7.0.0 3DB 19286 ACAA Issue 01