WebEML User Manual Log in to and out of system
103
2. Click Yes.
The JUSM window closes.
3. To close the NEtO application, click Exit. See Figure 17.
The confirm request window opens.
4. Click Yes.
The NEtO window closes.
If both FTP/SFTP servers are disabled and no other RMI Registry components
are running, the NEtO Servers Manager window will close automatically.
If the NEtO Servers Manager detects either FTP/SFTP server enabled or other
RMI Registry components running the NEtO server Manager will remain open.
5. To close NEtO Servers Manager application, in the upper right hand corner of
the NEtO Servers Manager window, select the “X”. See Figure 25.
Figure 25 Close NEtO Servers Manager window
The NEtO Servers Manager close window opens.
6. Click Yes.
The NEtO Servers Manager window closes.
To log in to Web Server
1. In a web browser, enter the radio IP address or the URL (shown below).
https://radio IP Address
Note: Web Server is available when a Core-E card is in use. When a CorEvo
card is in use, logging in from a web browser opens WebCT. For more
information about WebCT, see the 9500 MPR WebCT User Manual.
Release 7.0.0 3DB 19286 ACAA Issue 01
To Next Page
Loading...