WebEML User Manual Preface
45
Audience
This guide is intended for network installers and system administrators who are
responsible for installing, configuring, or maintaining networks. This guide assumes
you are familiar with electronic and networking technologies.
Information symbols
Observe the warnings and notes to avoid injury or equipment damage during
installation and maintenance. Follow the safety procedures and guidelines when
working with and near electrical equipment. Warning statements and notes are
provided in each chapter.
The following symbols are contained in the 9500 MPR documentation.
MSS MSS-1/4/8/O
Note that the term MSS does not include
the MSS-1c.
EAS P8ETH and EASv2 cards
Core Core-E and CorEvo cards
MSS/CORE ports of MSS-O and MSS-1
CorEvo CorEvo-1G and CorEvo-10G cards
PDH E1, DS1, and DS3
SDH STM-1 and OC-3
Table 3 Naming conventions (Continued)
Term Refers to
Danger: indicates that the described activity or situation may result in serious
personal injury or death; for example, high voltage or electric shock hazards.
Warning: indicates that the described activity or situation may, or will, cause
equipment damage or serious performance problems.
Release 7.0.0 3DB 19286 ACAA Issue 01
To Next Page
Loading...