Nokia 9500 MPR - Figure 28 Web Server Community Strings Setting View

Administer community string
108
WebEML User Manual
• To set the community string using the NEtO
To set the community string using the Web Server
1. Log in to the NE using a web browser. See Log in to and out of system for
detailed instructions.
The 9500MPR Web Server displays. Active Alarms is the default web server
window.
2. From the Main Menu pane, select Community String.
The Community Strings Setting view displays. See Figure 28.
Figure 28 Web Server Community Strings setting view
3. In the Read-Only Community String field, enter the new value (public is the
default value).
4. In the Read-Write Community String field, enter the new value (private is the
default value).
5. Click Apply.
To set the community string using the NEtO
Caution: Provisioning new Community Strings will cause a loss of communication on all
NEtO sessions currently active.
Release 7.0.0 3DB 19286 ACAA Issue 01