WebEML User Manual Equipment provisioning and deprovisioning
291
Equipment provisioning and depro-
visioning
• Administer Ethernet Ring Protection (ERP)
• Administer L1/L2 radio and L2 Ethernet LAG ports
• Administer synchronization
• Provision cross connections
• Deprovision cross connections
• Provision port segregation/connectivity
• Configure AUX cross connections (ETSI market only)
• Provision Ethernet ports
• Provision Ethernet Features
• Provision equipment port
• Deprovision equipment ports
• Enable equipment
• Disable equipment
• Provision Ethernet Ring Protection (ERP)
• Upgrade a Ring to R5.1.0 software
• Provision cross connections in a mixed fiber/microwave Ring
• Provision Ring cross-connections using the aided cross-connection tool
• Provision protection scheme parameters
• Provision Protection Type
• Configure radio parameters
• Perform IPv6 pre-provisioning
• Use the Provisioning Tool
• Apply a configuration using the Web Server
Note: Performance monitoring on affected equipment should be disabled before
making configuration changes.
Release 7.0.0 3DB 19286 ACAA Issue 01
To Next Page
