Nokia 9500 MPR - Figure 290 Deprovisioned P2 E3 DS3 Ports

WebEML User Manual Deprovision equipment ports
473
Figure 290 Deprovisioned P2E3DS3 ports
To deprovision an SDH port
1. Click on the SDHACC OC-3 card in the resource list area. See Figure 291.
Note: When an SDH port with performance monitoring active is disabled, the
elapsed time of the performance monitoring will be stopped until the port is
enabled again.
Release 7.0.0 3DB 19286 ACAA Issue 01