Nokia 9500 MPR - Figure 207 Radio (P8 ETH) to Radio (MPTACC) Cross Connection

Provision cross connections
374
WebEML User Manual
Figure 207 Radio (P8ETH) to Radio (MPTACC) Cross Connection
3. On the RADIO-RADIO pop-up, enter Flow ID number for the far-end in the Flow
ID field.
4. From the Profile drop-down menu, select TDM2TDM or TDM2ETH.
5. Is the Profile configured with TDM2ETH?
a. If yes, go to step 6.
b. If no, go to step 7.
6. From the TDM Clock Source drop-down menu, select ADAPTIVE or
DIFFERENTIAL.
7. On the RADIO-RADIO pop-up, click OK.
Note: Ranging is supported for RADIO-RADIO cross-connection entry.
Release 7.0.0 3DB 19286 ACAA Issue 01