Nokia 9500 MPR - 2 High-Level Procedure for E1;DS1 Provisioning; Purpose; Procedure

WebEML User Manual High-level procedure for E1/DS1 provisioning
65
2 High-level procedure for E1/DS1
provisioning
2.1 Purpose
This chapter provides the high-level procedure for provisioning E1/DS1 facilities and
equipment.
2.2 Procedure
1. Select action.
a. To provision E1/DS1 cross-connect to new E1/DS1 P32E1DS1 card, go to
step 2.
b. To provision E1/DS1 cross-connect to new E1/DS1 port, go to step 3.
c. To provision E1/DS1 cross-connect to existing E1/DS1 port, go to step 4.
2. Provision E1/DS1 cross-connect to new E1/DS1 P32E1DS1 card on an MSS-4/
8:
a. See Enable equipment to enable P32E1DS1 Card.
b. See Provision equipment port to provision E1/DS1 ports.
c. See Provision cross connections to provision E1/DS1 cross-connect.
3. Provision E1/DS1 cross-connect to new E1/DS1 port on an MSS-1/4/8:
a. See Provision equipment port to provision E1/DS1 ports.
b. See Provision cross connections to provision E1/DS1 cross-connect.
4. Provision E1/DS1 cross-connect to existing E1/DS1 port on an MSS-1/4/8: see
Provision cross connections.
Release 7.0.0 3DB 19286 ACAA Issue 01