Nokia 9500 MPR - Figure 659 MPT ODU Maintenance Tab

WebEML User Manual Configure radio parameters
881
5. Click Apply.
To administer the ACM Manual settings
1. Open the appropriate radio main view depending on your configuration and
select the Maintenance tab.See Figure 659.
Figure 659 MPT ODU Maintenance tab
2. Force a modulation scheme:
i. Select the Manual Operation check box.
ii. Choose the scheme from the Forced Tx Modulation drop-down.
Note: If the NE is still reachable after the transmitter is muted, you can change the timeout
parameter. The new value will overwrite the previous timeout and the timer starts from the
current timestamp.
Release 7.0.0 3DB 19286 ACAA Issue 01