Nokia 9500 MPR - Figure 582 Rx Radio Protection Scheme Parameter Tab; Figure 583 Physical Cable Warning Example

Provision protection scheme parameters
770
WebEML User Manual
Figure 582 Rx Radio Protection Scheme Parameter tab
2. Select Rx Radio Protection in the resource tree area.
3. Select Protection Scheme Parameters Tab.
4. From the Restoration Criteria partition, verify restoration criteria selection and
provision if required:
a. Select restoration criteria radio button, Not Revertive or Revertive.
b. Select Physical Cable in the RPS configuration pane if an RPS cable is in
use.
If the Physical cable check box is not checked, a warning is displayed. See
Figure 583.
Figure 583 Physical Cable warning example
c. Click Yes to proceed, or No to return to the Protection Scheme
Parameters Tab
d. Click Apply in the Protection Scheme Parameters Tab.
Release 7.0.0 3DB 19286 ACAA Issue 01