WebEML User Manual Perform debug functions using the Web Server
287
38.3 Procedure
1. Log In to NE. For detailed steps to log in to an NE using a web browser, see Log
in to and out of system.
The 9500 MPR Web Server displays. Active Alarms is the default web server
window.
2. Select Administration → Debug Info and select a command from the pull down
list.
GE13 14 Slot 7
GE14 15 Slot 2
GE15 16 Slot 4
GE16 17 Slot 6
GE17 18 Eth. User #1
GE18 19 Eth. User #2
GE19 20 Eth. User #3
GE20 21 Eth. User #4
Table 5 Association of the GExx in the command output and the NE port
GE Port n° HW connection
Release 7.0.0 3DB 19286 ACAA Issue 01
To Next Page
Loading...